### Learning Math and Coding with Robots

 Grid: Tics Lines: Width px Hash Lines: Width px Labels: Font px Trace Lines: Robot 1: Width px Robot 2: Width px Robot 3: Width px Robot 4: Width px
 Axes: x-axis y-axis Show Grid Grid: 24x24 inches 36x36 inches 72x72 inches 96x96 inches 192x192 inches Quad: 4 quadrants 1 quadrant Hardware Units: US Customary Metric
 Background:

#### Robot 1

 Initial Position: ( in, in) Initial Angle: deg Current Position: (0 in, 0 in) Current Angle: 90 deg Wheel Radius: 1.75 in1.625 in2.0 in Track Width: in

#### Robot 2

 Initial Position: ( in, in) Initial Angle: deg Current Position: (6 in, 0 in) Current Angle: 90 deg Wheel Radius: 1.75 in1.625 in2.0 in Track Width: in

#### Robot 3

 Initial Position: ( in, in) Initial Angle: deg Current Position: (12 in, 0 in) Current Angle: 90 deg Wheel Radius: 1.75 in1.625 in2.0 in Track Width: in

#### Robot 4

 Initial Position: ( in, in) Initial Angle: deg Current Position: (18 in, 0 in) Current Angle: 90 deg Wheel Radius: 1.75 in1.625 in2.0 in Track Width: in

Rectangle with Given Perimeter and Area
Problem Statement:
Right now, dimensionOne and dimensionTwo are both set to 0. Change them to create a route for the robot that traces a rectangle with a perimeter of 20 units and an area of 24 units.
```/* Code generated by RoboBlockly v2.0 */
#include <linkbot.h>
double dimensionOne;
double dimensionTwo;
double answer;
double variable;
CLinkbotI robot;
double radius = 1.75;
double trackwidth = 3.69;

dimensionOne = 4;
dimensionTwo = 6;
robot.driveDistance(dimensionOne, radius);
robot.turnRight(90, radius, trackwidth);
robot.driveDistance(dimensionTwo, radius);
robot.turnRight(90, radius, trackwidth);
robot.driveDistance(dimensionOne, radius);
robot.turnRight(90, radius, trackwidth);
robot.driveDistance(dimensionTwo, radius);
printf("What is dimension one? (give the smaller dimension)"+"\n");
scanf("%lf", &answer);
printf("What is dimension two? (give the larger dimension)"+"\n");
scanf("%lf", &variable);
```
 Blocks Save Blocks Load Blocks Show Ch Save Ch Workspace
Problem Statement:
Right now, dimensionOne and dimensionTwo are both set to 0. Change them to create a route for the robot that traces a rectangle with a perimeter of 20 units and an area of 24 units.

Time