Learning Math and Coding with Robots

Linkbot Image Mindstorm Image Cursor Image
0x126-6-12y126-6-12
Grid:
Tics Lines:
Width px
Hash Lines:
Width px
Labels:
Font px
Trace Lines:
Robot 1:
Width px
Robot 2:
Width px
Robot 3:
Width px
Robot 4:
Width px
Axes: x-axis y-axis Show Grid
Grid: 24x24 inches 36x36 inches 72x72 inches
96x96 inches 192x192 inches
Quad: 4 quadrants 1 quadrant Hardware
Units: US Customary Metric
Background: Background Image

Robot 1

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 0 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 2

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 4 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 3

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 8 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 4

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 12 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Cube
Problem Statement:
The pre-placed blocks drive the Linkbot into starting position and begin drawing the first edge of a cube. Add in more blocks to finish the cube.
/* Code generated by RoboBlockly v2.0 */
#include <linkbot.h>
CLinkbotI robot;
double radius = 1.75;
double trackwidth = 3.6;
int count;
int count2;

robot.setSpeed(50, radius);
robot.traceOff();
robot.driveDistance(-6, radius);
robot.traceOn();
count = 0;
while(count < 4) {
  robot.driveDistance(6, radius);
  robot.turnRight(90, radius, trackwidth);
  count = count + 1;
}
robot.turnRight(315, radius, trackwidth);
robot.driveDistance(3, radius);
robot.turnRight(45, radius, trackwidth);
robot.driveDistance(6, radius);
robot.turnRight(135, radius, trackwidth);
count2 = 0;
while(count2 < 2) {
  robot.driveDistance(3, radius);
  robot.turnLeft(45, radius, trackwidth);
  robot.driveDistance(6, radius);
  robot.turnLeft(135, radius, trackwidth);
  count2 = count2 + 1;
}
/* Code generated by RoboBlockly v2.0 */
#include <linkbot.h>
CLinkbotI robot;
double radius = 1.75;
double trackwidth = 3.6;

robot.setSpeed(50, radius);
robot.traceOff();
robot.driveDistance(-6, radius);
robot.traceOn();
robot.driveDistance(6, radius);
robot.turnRight(90, radius, trackwidth);
robot.driveDistance(6, radius);
robot.turnRight(90, radius, trackwidth);
robot.driveDistance(6, radius);
robot.turnRight(90, radius, trackwidth);
robot.driveDistance(6, radius);
robot.turnRight(90, radius, trackwidth);
robot.turnRight(315, radius, trackwidth);
robot.driveDistance(3, radius);
robot.turnRight(45, radius, trackwidth);
robot.driveDistance(6, radius);
robot.turnRight(135, radius, trackwidth);
robot.driveDistance(3, radius);
robot.turnLeft(45, radius, trackwidth);
robot.driveDistance(6, radius);
robot.turnLeft(135, radius, trackwidth);
robot.driveDistance(3, radius);
robot.turnLeft(45, radius, trackwidth);
robot.driveDistance(6, radius);
Blocks Save Blocks Load Blocks Show Ch Save Ch Workspace
Problem Statement:
The pre-placed blocks drive the Linkbot into starting position and begin drawing the first edge of a cube. Add in more blocks to finish the cube.

		
Rubbish bin
Time