### Learning Math and Coding with Robots

 Grid: Tics Lines: Width px Hash Lines: Width px Labels: Font px Trace Lines: Robot 1: Width px Robot 2: Width px Robot 3: Width px Robot 4: Width px
 Axes: x-axis y-axis Show Grid Grid: 24x24 inches 36x36 inches 72x72 inches 96x96 inches 192x192 inches Quad: 4 quadrants 1 quadrant Hardware Units: US Customary Metric
 Background:

#### Robot 1

 Initial Position: ( in, in) Initial Angle: deg Current Position: (0 in, 0 in) Current Angle: 90 deg Wheel Radius: 1.75 in1.625 in2.0 in Track Width: in

#### Robot 2

 Initial Position: ( in, in) Initial Angle: deg Current Position: (4 in, 0 in) Current Angle: 90 deg Wheel Radius: 1.75 in1.625 in2.0 in Track Width: in

#### Robot 3

 Initial Position: ( in, in) Initial Angle: deg Current Position: (8 in, 0 in) Current Angle: 90 deg Wheel Radius: 1.75 in1.625 in2.0 in Track Width: in

#### Robot 4

 Initial Position: ( in, in) Initial Angle: deg Current Position: (12 in, 0 in) Current Angle: 90 deg Wheel Radius: 1.75 in1.625 in2.0 in Track Width: in

Graphing Ordered Pairs in the Coordinate Plane
Problem Statement:
The pre-placed block will drive the robot 1 unit up along the y-axis and then turn the robot right 90 degrees to move 1 unit along the x-axis. Change the driveDistance( ) blocks so that the robot moves to the point (4, 6) on the coordinate grid.
```/* Code generated by RoboBlockly v2.0 */
#include <linkbot.h>
CLinkbotI robot;
double radius = 1.75;
double trackwidth = 3.69;

robot.driveDistance(6, radius);
robot.turnRight(90, radius, trackwidth);
robot.driveDistance(4, radius);
```
 Blocks Save Blocks Load Blocks Show Ch Save Ch Workspace
Problem Statement:
The pre-placed block will drive the robot 1 unit up along the y-axis and then turn the robot right 90 degrees to move 1 unit along the x-axis. Change the driveDistance( ) blocks so that the robot moves to the point (4, 6) on the coordinate grid.

Time