Learning Math and Coding with Robots

0x2418126y2418126
Grid:
Tics Lines:
Width px
Hash Lines:
Width px
Labels:
Font px
Trace Lines:
Robot 1:
Width px
Robot 2:
Width px
Robot 3:
Width px
Robot 4:
Width px
Axes: x-axis y-axis Show Grid
Grid: 24x24 inches 36x36 inches 72x72 inches
96x96 inches 192x192 inches
Quad: 4 quadrants 1 quadrant
Units: US Customary Metric
Background:

Robot 1

Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 12 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 2

Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 6 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 3

Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 12 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 4

Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 18 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Multiple Operations: Addition and Multiplication
Problem Statement:
Modify the preplaced blocks so the robot will drive 7 units forward. You can change one, two, or all three numbers. The operations must remain the same and are performed according to Order of Operation.
/* Code generated by RoboBlockly v2.0 */
/* Problem Statement: 
    Modify the preplaced blocks so the robot will drive 18
    units forward. You can change one or both of the numbers,
    just make sure your numbers have a product of 18 units.  */
#include <linkbot.h>
CLinkbotI robot;
double radius = 1.75;
int count;

// Sample: 2 * 9 = 18
robot.traceColor("red", 3);
count = 0;
while(count < 2) {
  robot.driveDistance(9, radius);
  robot.delaySeconds(1);
  count = count + 1;
}
/* Code generated by RoboBlockly v2.0 */
/* Problem Statement: 
    Modify the preplaced blocks so the robot will drive 7 units
    forward. You can change one, two, or all three numbers. The
    operations must remain the same and are performed according
    to Order of Operation.   */
#include <linkbot.h>
CLinkbotI robot;
double radius = 1.75;
int count;

// This is one possible combination to drive the robot 7 units
count = 0;
while(count < 2) {
  robot.driveDistance(3, radius);
  robot.delaySeconds(1);
  count = count + 1;
}
robot.delaySeconds(1);
robot.driveDistance(1, radius);
Blocks Save Blocks Load Blocks Show Ch Save Ch Workspace
Problem Statement:
Modify the preplaced blocks so the robot will drive 7 units forward. You can change one, two, or all three numbers. The operations must remain the same and are performed according to Order of Operation.

		
Time